Flow indicator of liquid ammonia

Contact Details


The STF series chlorine flow indicator corrodes mediums and adopts the special material sensor to the chemical trade, for instance Kazakhstan C alloy, titanium, the characteristic is steady, it is accurate to measure, to having very good adaptability in the working condition which corrodes mediums with difficult flow measurement such as acid, alkali, chlorine.




[Products principle ]
STF serial electronic target flow indicators are on the basis of traditional force sensor, new electric capacity strength induction type flow indicator developed with the development of new sensor, microelectronic technology, it has flow indicators such as aperture plates, whirlpool street,etc. and has no characteristic of the movable member, while have very high degree of sensitivity, accuracy grade comparing favourably with positive displacement flowmeter, quantum range is wide. The constructional design is that this new product really realizes the key core of high precision, high stability to adopt the capacitive force sensor of the chip level, efficient and resist in year, in addition its peculiar anti-interference, resisting the impurity characteristic, the metric flow measurement question that except that can substitute the regular flowrate, especially in high degree of viscosity, dirty dirty medium, easy to congeal apt stop up, high temperature, low temperature, strong to corrode, have very fine adaptability in the the intersection of flow measurement and difficult working condition, apply to fields such as the petroleum, chemical industry, metallurgy, electricity, pharmacy, environmental protection, food,etc. extensively.
The applicable tube's diameter range is wide: 10 to loud 2000 ;
The applicable temperature range is wide: -196 degrees C 500 degrees of C;
Applicable height / working condition of low pressure: 0~42MPa;
Applicable to various mediums: Gas, liquid ' Including the highly viscous liquid, syrups) , steam;
Suitable for the low velocity of flow medium, its lowest velocity of flow of measurable quantity is 0.08m/s.

[Products parameter ]
The name of product: Chlorine flow indicator
The requirements: DN15- DN3000mm expires by greater
Nominal pressure: 0.6- 42MPa
The temperature of working condition: -20- 300 (please contact factory to need higher temperature)
Precision: 0.2 - 1.5% FS
Quantum than: 1: 10
Shell: Carbon steel (line with Fluorine) ; Stainless steel
Power supply mode: Built-in 3.6VDC lithium cell (can be used for two years) ; Support 24VDC outside
Outcoming signal: 4- 20mA two-wire system; Pulse 0- 1000HZ; RS485
Protection grade: IP65
Unexplosive marks: Intrinsically safety type; Explosion suppression type

The list head reveals: Accumulate the flowrate; Instant flowrate; Scale span percentage; Self test of the trouble
Connection mode: Pipeline flange formula (DN15-300mm) ; Plug-in (DN100-DN3000mm to bigger) .

[Characteristic of the products ]
Without movable member, it is corrupt to be able to bear dirtily, it is simple and convenient and non-maintaining to install
Can choose the multi-type and antisepticize and able to bear the high low-temperature material (the alloy such as Kazakhstan, titanium,etc.)
The complete machine is too totally enclosed to have blind angle, without any leakage point, can be able to bear 42MPa high pressure
The pressure loss is little, it is only 1/2 of the standard aperture plate About P
The sensor does not keep in touch with the measured meidum, there are spare parts that are abraded, it is safe and reliable to use
Applicable medium range is wide: Can measure the gas, liquid, steam flow under various temperature accurately, measurable two-phase flow
Many kinds of installation ways are chosen, online and plug-in such as choosing, the mounting cost are low
Have integrated temperature, pressure compensation, the quality of direct output or marking the side
Available dwarf signal excises, non-linear revision, filtering time can be chosen
It is accurate to measure, precision is achievable 0.2~1.5%
Repeatability is good, it is generally 0.05- 0.08%, measurement is fast
Set up the self-check program in the instrument, the failure phenomenon is very clear
Anti-interference, the ability to resist impurity is specially strong
Many kinds of output forms, Yes various parameters of remote transmitting
It is strong to resist the shaking, the measurable pulsating flow in a certain limit

[Operational capacities ] is 10,000 every year of planned capacity of production
[It is promised that after sale ] the three guarantees of 18 months from the day of dispatching from the factory of the products, does not damage the quality problem artificially, our company is responsible for guaranteeing the repair free of charge, guarantees replacement, caveat vendor.

[Company's websites ]www.shang-tai.com
[Saling hot line ] 029-84211211

Contact Information

Contacts: Mr. Fan Sen
Telephone: 86-029-84211211
Mobile Phone: 13759878187
Fax: 86-029-84211219
Zip: 710077
Address: Shaanxi Province the skill rises on the 8th floor of International Building the 10th such as south segment such as W.2nd Ring Road such as Xi'an such as city such as Xi'an

TAG:

Related
    No relevant information